BBA Approved

Call:

Speak to someone
about Stormdry

01403 220130

Multi-surface Biocide Surface preparation for Stormdry

  • Stormdry surface prep
  • Clears biological growth
  • Apply using, brush, roller, or spray
  • Ready for use (no mixing)
  • Can be used on a variety of substrates

What is Soluguard Multi-surface Biocide

Soluguard Multi-surface Biocide is a surface masonry treatment used for clearing biological growth from masonry surfaces prior to the application of Stormdry Masonry Protection Cream.

Not only limited to Stormdry masonry preparation Soluguard Multi-surface Biocide can be used independently to remove biological growth from a range of substrates.

Application of Soluguard Multi-Surface Biocide

Soluguard Multi-Surface Biocide is supplied ready-for use. It can be applied using, brush, roller, or coarse spray - ensuring good overall wetting.

For best results, the treated surface should be cleaned after 72 hours or more using clean water using a pressure washer. This will remove deposits of dead biological growth from the treated surface.

Soluguard Multi-Surface Biocide should be applied in dry weather – ideally when no rain is forecast for the next 24 hours.

  • Remove handle from sprayer

  • Pour Soluguard Ready For Use into sprayer

  • Attach handle and shake the sprayer

  • Pump spayer and spray onto affected areas